For American Clinic Owners
The premium low-speed kit, with water where the bur works.
Titanium coating, internal water spray and German ceramic bearings across an air motor, a 1:1 contra-angle and a straight handpiece. Order five and it lands at $299 each, backed by a full replacement warranty.
- Internal water spray
- Titanium coating
- German ceramic bearings
The Premium Low-Speed Kit
Built to last longer, and run cooler.
Internal spray sends water through the handpiece to the head, so cooling reaches the bur even in tight posterior access. A titanium-coated body and German bearings are built for daily use and repeated autoclaving.
In stock · US $150 off Per Box Of 5 M3-LN Low-Speed Kit 1:1
A titanium-coated low-speed kit with a push-button contra-angle, a straight handpiece and an air motor, plus internal water spray and German ceramic bearings.
Per kit · 5+ pieces
Engineered & Priced Differently
The specs that matter, the economics that work.
Cooling at the bur.
Internal spray routes water through the handpiece to the head, instead of along an external tube that can snag or get in the way.
No middleman markup.
Direct to clinics. The 30 to 50% distributor margin lands in your business instead of someone else’s.
Replacement, not repair.
If it fails inside year one, we send a new unit. No repair queue, no chair downtime.
Clinical Uses
Which procedures it’s built for.
One air motor drives two attachments. Here’s where each one earns its place in a typical week, and where to reach for something else.
1:1 Contra-Angle
CA burs · Ø 2.35 mm- Caries excavation
Low speed with a round bur gives the tactile feedback needed to remove soft dentin near the pulp without over-cutting.
Internal spray keeps the bur cool - Cavity and crown prep refinement
Smooth walls, refine margins and place retention features after gross reduction with the high-speed.
- Finishing and polishing restorations
Contour and polish composites with finishing burs, discs and polishing points.
- Removing temporaries and cement
Clear provisional material and residual cement before final seating.
Straight Handpiece
HP burs · Ø 2.35 mm- Denture adjustments
Relieve sore spots, trim flanges and smooth acrylic chairside with acrylic trimmers.
- Occlusal guards and splints
Adjust and polish night guards, bite splints and retainers before delivery.
- Custom trays and lab trimming
Trim tray material, models and provisionals in the lab or at the chair.
- Polishing appliances
Use mandrels with wheels and points to finish removable appliances.
Not for surgical procedures
- Air-driven handpieces vent air toward the working end. Don’t use them for bone cutting, surgical extractions or flap surgery, because air forced into tissue can cause subcutaneous emphysema.
- For surgical extractions, use the Red Band 45° or the Surgical High-Speed Handpiece.
- For implant osteotomies, use the Green Band 20:1 on the JINME ES70 electric motor.
General guidance only. Always follow the manufacturer’s IFU and your own clinical judgement.
Full Specifications
Everything in the box, and every number.
Need the IFU or want to check compatibility with your delivery unit? Call +1 888 221 2166.
- 1×Air motor, 4-hole
- 1×1:1 contra-angle, push-button
- 1×Straight handpiece
| Model | JINME M3-LN |
|---|---|
| Type | Low-speed air-driven kit (motor, contra-angle, straight) |
| Gear ratio | 1:1 |
| Max speed | Up to 20,000 RPM |
| Connection | 4-hole |
| Water spray | Internal |
| Bearings | German ceramic |
| Finish | Titanium coating |
| Lubrication | Self-lubricating mechanism |
| Chuck | Push-button (contra-angle) |
| Burs | Ø 2.35 mm CA burs |
| Sterilization | Autoclavable to 275 °F (135 °C) |
| Warranty | 1-year replacement warranty |
Owner FAQs
The four questions owners ask first.
Still stuck on something not answered below? Email us at Info@pv-dent.com or call +1 888 221 2166 and a real human will reply within 24 hours.
How is it different from the M1-L kit?
Both are 1:1 kits with an air motor, contra-angle and straight handpiece. The M3-LN adds internal water spray, a titanium-coated body and German ceramic bearings. The M1-L uses external spray and costs less, making it a good fit for polishing and lab work.
Will it fit my delivery unit?
The air motor uses a standard 4-hole connection. If your unit has a different coupling, call us on +1 888 221 2166 before ordering and we’ll confirm.
How does the pricing work?
Single kit is $329. Get $150 OFF on 5 kits. $299/ kit.
Does “self-lubricating” mean I never oil it?
No. The mechanism reduces how often it needs oil, but you should still clean and lubricate before each sterilization cycle, following the IFU. It’s autoclavable up to 275 °F (135 °C).
Stop overpaying. Start outfitting smarter.
Direct pricing. Replacement-grade warranty. 4-hole connection. Order five or more kits and lock in the bulk rate.
US Stock · 1-year replacement warranty · Same-week dispatch
Complete Your Operatory
Round out your handpiece set.
Pair the M3-LN with a high-speed, or add the M1-L as a second low-speed kit for hygiene rooms. All with bulk pricing on five or more.
Bulk Pricing Enquiries
Looking to order in bulk for your clinic?
Complete the form and our team will contact you with pricing, product options and next steps. or Contact Us: +1 888 221 2166
Get in touch
All fields are required.